Envitrack
Claus Process Catalysts
Home/Products/Catalysts/RCAT®-9000 Series

RCAT®-9000 Series

Claus Process Catalysts

A range of Claus conversion catalysts, from standard alumina to TiO₂-promoted and oxygen-scavenging types, for every converter bed in the sulfur recovery unit.

Application
Sulfur Recovery

Specifications

Technical Data

Typical values for key technical parameters.

CatalystApplicationContentAppearanceBulk densityOperating temp
RCAT®-9001 (Standard)Standard alumina-based Claus catalyst converting H₂S and SO₂ to elemental sulfurAl₂O₃ min. 93%4–6 mm white spheres*640–750 kg/m³190–350 °C
RCAT®-9002 (TiO₂ Promoted)Lower-cost COS and CS₂ conversion, less effective than a pure titania catalystTiO₂ min. 4%4–6 mm white spheres*700–800 kg/m³190–350 °C
RCAT®-9003 (TiO₂ Based)Titania catalyst for COS and CS₂ conversionTiO₂ min. 85%3–5 mm white extrudates*850–1000 kg/m³220–350 °C
RCAT®-9004 (Iron Promoted Oxygen Scavenger)Oxygen scavenger, typically the first layer, protecting downstream Claus catalysts from oxygen speciesFe max. 16%4–6 mm red spheres*680–800 kg/m³On request

* Different sizes available.

Application

Catalytic conversion stages of the modified Claus process, where H₂S and SO₂ are converted into elemental sulfur through a series of sequential converter beds. Each catalyst is designed for a specific role: RCAT®-9001 provides standard bulk conversion on alumina; RCAT®-9003 uses titania to enhance COS and CS₂ conversion; RCAT®-9002 offers a more economical alternative with lower COS and CS₂ conversion efficiency; and RCAT®-9004 serves as an oxygen scavenger, typically positioned as the first layer to protect the catalysts below.

Key product capabilities and benefits

  • A catalyst for each role in the converter train, from bulk conversion to COS and CS₂ hydrolysis and oxygen scavenging
  • Multiple particle sizes available to balance activity and pressure drop
  • Backed by Envitrack start-up support and catalyst characterization services

Request a Product Data Sheet

Contact our technical team for all available product specifications and supporting documentation.

Send Request

We’ll get back to you with our most recent technical documentation via email.

Opens in your mail client, addressed to sales@envitrack.com.

FAQ

Frequently Asked Questions

Are other sizes available?
Yes. Wherever a size is listed with an asterisk, other particle sizes are available on request. Tell us your bed geometry and pressure-drop limits and we will recommend a size.
Can we get a full technical data sheet?
Yes. Request the TDS using the form on this page and our technical team will send the current edition by email.
Can we test before committing to a full charge?
For several ranges Envitrack supplies samples and facilitates pilot testing under your plant conditions. Ask us about sample testing for this product.
Who supports installation and start-up?
The same technical people who develop the catalysts. Start-up support, characterization, performance testing and troubleshooting are delivered on site by Envitrack specialists.

Case Study

Customer Results

European Refinery Improves Sulfur Recovery Through Direct Oxidation Catalyst Replacement

RCAT®-9007 · European refinery · Direct oxidation sulfur recovery unit

Read Case Study →

Let’s Discuss Your Catalyst Application

Tell us about your process and current catalyst setup. Our technical team can recommend the right catalyst and support testing to make sure it’s the right fit for your process.

  • Catalysts
  • Adsorbents
  • Inert materials